-
Look at the bottom of your phone set, in the area where the cords
plug into the phone
-
There should be one cord connected from your wall jack and another
curly cord connected to your handset, look for a third port or plug-in
-
A headset port may be the same size as the handset plug-in (RJ22 modular)
-
Or a headset port may be a small circular hole
2.5mm in diameter
-
A headset port may appear at the back or on one of the sides of
the phone set
-
The port is usually marked with the word 'Headset' or a picture of a headset
-
Some phone sets have one jack for both handset and headset. Only one
or the other can be used at any time. If you wish to have the ability to
switch between the two, you will need an amplifier. Amplifiers have the
ability to switch between handset and headset
-
Your phone set may need some programming to activate
the headset port. Consult your operational manual or your phone
provider
